Trykplade trækanker HighLoad
Material
- Galvanised S355 construction steel
Advantages
- Ideal for anchoring cross-laminated timber elements (CLT)
- For installation in concrete, wood and steel
Note
- The Trykplade trækanker HighLoad may only be used in combination with the Trækanker HighLoad (item no.: 954114).
Instructions for use
The Trækanker are positioned on the planking in the floor area to mark the drill hole. The Trækanker is then put aside to drill and clean
the hole, and finally the Trækanker is glued in using injection mortar. Now the Trækanker incl. Trykplade trækanker can be positioned and fastened to the stem or wooden element with WBS screws or anchor nails. Finally, the nut is screwed onto the anchor rod using the relevant
torque. The connection can safely transfer tensile, suction and shearing forces into the tension rod via the screws and finally into the base
plates via a dowel. Edge and centre distances according to EC5 as well as the curing time and tightening torque of the concrete anchor must be observed.
Varetabel
| Art. no. | Designation | Dimension | Material | Matching tension rod | PU | EAN Code |
|---|---|---|---|---|---|---|
| 954178 | Trykplade trækanker HighLoad mm | 130 x 82 x 40 mm | Galvanised S355 construction steel | Trækanker HighLoad (954114) | 1 | 4251314733566 |
