.
The Pick MAX transport anchor allows for the easy and efficient lifting of wooden parts such as plywood, laminated timber and solid timber. The system developed in Austria impresses with a load cycle of up to 16,000 lifting operations and a payload of up to 2,400 kilograms per fastening point. It only requires a blind hole with a diameter of 50 millimetres and a depth of 140 millimetres to carry out the assembly. As a result, the surface quality remains untouched and no additional fastening screws are required.
The Pick MAX Transport Anchor is supplied as a system case. The System Case contains the following parts:
- 2 Pick MAX transport anchors
- 2 shackles
- Drill HMB
- IBG drill bell
Advantages/Specifications
- Payloads of up to 2,400 kg per fastening point
- Attached in a few simple steps, no need to align the lifting tackle.
- The visible quality of the surfaces is not affected; no fastening screws are required.
- Long service life: 16,000 load cycles (in accordance with EN 13155:2020)
- Versatile application: on the front side, panel side or on the cross-beam side for all types of beams
Note
- The specifications of the operating instructions included with the product must be observed
- Have the load-handling equipment checked once a year by authorised persons. You can find the details in the enclosed operating instructions.
- Document your inspections in the maintenance book of the operating instructions.
- Feel free to take advantage of the Pick Check offer at any time.
- The Pick MAX Transport Anchor is supplied in a system case as a set for 2 lifting points and the necessary installation material.
- The hole can be used for lifting a maximum of 6 times.
- The lifting anchor can be used a maximum of 16,000 times.
