Tension rod pressure plate 340/440/540

Material 

• Galvanised S355 construction steel

Advantages

• The tensile force can also be increased in combination with the pressure plate
• For installation in wood and concrete

Certification

• European Technical AssessmentETA-19/0020

Note

• The Tension rod pressure plate 340/440/540 may only be used in combination with the Tension rod 340/440/540 (Art. no.: 954099, 954100, 954231).

Instructions for use
The tension rods are positioned on the planking in the floor area to mark the drill hole. The tension rod is then put aside to drill and clean the hole, and finally the tension rod is glued in using injection mortar. Now the tension rod incl. pressure plate can be positioned and fastened to the stem or wooden element with WBS screws or anchor nails. Finally, the nut is screwed onto the anchor rod using the relevant torque. The connection can safely transfer tensile, suction and shearing forces into the tension rod via the screws and finally into the base plates via a dowel.

Edge and centre distances according to EC5 as well as the curing time and tightening torque of the concrete anchor must be observed.