Produktbild
❮
❯

Magnus S

The Magnus hook connector is used to make node connections in woodworking. This connector impresses in particular due to its complete prefabrication, which in turn leads to minimal assembly times on the construction site. The connector consists of two different components: wood construction screws and fixing screws. The two individual parts of the Magnus are fastened to the respective components using the wood construction screws and then pushed into one another without force or friction. The two components are braced against each another by means of fixing screws. This effectively prevents unintentional loosening of the connection. Wood connections created by Magnus can be subjected to static loads in five directions with high, tested values. Installation can be carried out both visibly (for shadow groove connections) and concealed (milled in).

Advantages

  • Easy installation
  • High level of prefabrication
  • Suitable for high loads
  • Visible and concealed connections
  • Milling cutter as well as milling and assembly jig available
  • ESC calculation software for free preliminary calculation

Installation instructions

  1. Hidden (milled-in) main/secondary beam joints
    Adjust the end stop of the milling and assembly jig to the desired size of the Magnus hook connector, apply and screw on the milling and assembly jig, and create a routed slot with the corresponding groove-milling cutter.
  2. The Magnus is then inserted into the routed slot and fastened inplace using the supplied system screws. Following this, the milling and assembly jig is placed in the same position as before on the component that is to be connected, and the second part of the Magnus hook connector is screwed on.Pre-assembly is now complete, and the component being connected is hooked in place.
  3. The fixing screws are then inserted into the Magnus. This pulls the Magnus hook connector together, if necessary, and ensures correct positioning of the node joint.

Installation can be both visible (for shadow-groove joints) and hidden (milled in). The assembly example shows hidden installation. In this type of installation, there is no need to mill out a slot, and the milling and assembly jig is used only as an assembly jig.

The scope of delivery includes 120 pcs fully threaded screws (4.0 x 30 mm), blue zinc-plated (TX15); 20 pcs fixing screws (4.2 x 26 mm), blue zinc-plated (TX15); 1x assembly instructions.

Art. no. Designation Dimensions (W x H x D) PU EAN
944875 Magnus S 50 x 60 mm 50 x 60 x 13 mm 10 Pieces 4251314705471
944876 Magnus S 50 x 80 mm 50 x 80 x 13 mm 10 Pieces 4251314705488
944877 Magnus S 50 x 100 mm 50 x 100 x 13 mm 10 Pieces 4251314705495
× ❮ ❯
Großansicht