KonstruX ST, countersunk head stainless steel A4
KonstruX ST A4 maximise a joint’s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint’s load-bearing capacity is limited by the considerably lower head-pull-through resistance in the attached part.
Suitable for use in wood/wood joints, both indoors and outdoors.
The application areas of KonstruX ST A4 can be found on playgrounds, balconies, in sun protection in the form of a pergola as well as in hydraulic engineering, e.g. jetties and piers outdoors.
Advantages
- Can be used in service classes 1 to 3 according to DIN EN 1995 - Eurocode 5
- Suitable for woods containing tannins and salty atmospheres
- Corrosion-resistant and conditionally acid-resistant
- Good resistance in moderately aggressive environments that do not contain chlorine
Material
- Austenitic high-grade steel A4 1.4401
Follow the application instructions in the product data sheet.
Product table
| Art. no. | Dimensions | Drive | PU | EAN |
|---|---|---|---|---|
| 944795 | 8,0 x 95 mm | TX40 | 50 | 4064827278437 |
| 944792 | 8,0 x 125 mm | TX40 | 50 | 4064827152102 |
| 944793 | 8,0 x 155 mm | TX40 | 50 | 4064827152119 |
| 944794 | 8,0 x 195 mm | TX40 | 50 | 4064827152126 |
Other products in the category KonstruX
Konstrux ST Cylinder head
KonstruX ST Countersunk head
KonstruX Countersunk head, galvanised
KonstruX Countersunk head, stainless steel A4
KonstruX ST, countersunk head stainless steel A4
KonstruX ST, cylinder head stainless steel A4
KonstruX, 13 mm E12
