To the product table

Angle-bracket screw Strong

The Angle-bracket screw (ABS) Strong is made of hardened carbon steel that has been specially designed for joints involving steel plates. The special screw geometry reduces the splitting effect produced during the screw’s installation and, combined with the self-clearing groove, ensures that the screw „bites“ quickly. The screw’s increased shank diameter creates higher shear forces between the steel plate and the wood. The screw’s special geometry directly beneath the head ensures an excellent static performance that results from a plug-in effect between the screw and plate. In addition, the screw head’s edgeless geometry minimises the number of stress concentration points while enhancing the screw’s structural strength.

Applications

Conditionally corrosion-resistant and suitable for use in service classes 1, 2 and 3 according to DIN EN 1995 (Eurocode 5)
Compatible with our Tension Strap HighLoad steel plates
Not suitable for wood containing tannins

Material

Hardened carbon steel + blue galvanized
Free of chromium (VI) oxide
Good resistance to mechanical stresses

Data sheets

Product data sheet

Media library

Product table

Art. no.	Dimension	Drive	Thread length	PU	EAN
975815	8,0 x 60 mm	TX40	50 mm	50	4064827279366
975816	8,0 x 80 mm	TX40	70 mm	50	4064827279373
975817	8,0 x 100 mm	TX40	90 mm	50	4064827279380
975818	8,0 x 120 mm	TX40	110 mm	50	4064827279397
975819	8,0 x 140 mm	TX40	130 mm	50	4064827279403
975820	8,0 x 160 mm	TX40	150 mm	50	4064827279410
975821	10,0 x 80 mm	TX40	67,5 mm	50	4064827279427
975822	10,0 x 100 mm	TX40	87,5 mm	50	4064827279434
975823	10,0 x 120 mm	TX40	107,5 mm	50	4064827279441
975824	10,0 x 140 mm	TX40	127,5 mm	50	4064827279458
975825	10,0 x 160 mm	TX40	147,5 mm	50	4064827279465
975826	10,0 x 180 mm	TX40	167,5 mm	50	4064827279472