Paneltwistec TK AG StrongHead

Paneltwistec wood construction screws can be installed in CLT or Glulam without predrilling. Paneltwistec has a special AG screw tip, which ensures fast gripping and less splitting effect when screwing in. The cutting notch on the screw tip ensures fast gripping and less splitting effect when screwing in. Moreover, the thread not only speeds up the installation process but also reduces the screw-in torque. Washer head provides a high head pullthrough resistance and a sufficient pressure between two joined surfaces, which is very effective for gluing. When press-gluing is performed properly during the curing of adhesives, composite timber members can be produced. Moreover, rib panel applications can be achieved.

Advantages

• Quicker and easier to screw in
• Minimal splitting effect
• ETA - European Technical Assessment
• Usable in service classes 1 and 2
• Free from chromium(VI) oxide
• Screws can be screwed in smoothly thanks to the TX drive
• High pressure with uniform spread due to the Ø 24,5 mm washer head

Material

• Hardened carbon steel, blue galvanised
• Not suitable for wood containing tannins!